September 27, 2022
How-to-Change-the-Password-on-Wireless-Router

How to Change the Password on Wireless Router?

How to change the login information for your router

How to Change the Password on Wireless Router? Your first step should be to change the default password on your router after gaining access to it. Your router could be tampered with simply by walking up to it and changing the default password. You could, for example, be unaware that someone has disabled your wireless security and taken your personal information.

Passwords for routers can be changed as follows:

How to Change the Password on Wireless Router? Follow the following steps to know:

  • Go to your favorite web browser and enter the IP address of your router.
  • Username and password should be set to the defaults (both admin, usually).
  • Settings can be found there.
  • Change the router’s password by selecting Change Router Password.
  • You will need to enter a new password.
  • Save your changes.

The strength of a password is measured by its length, letters, numbers, and special characters.

Also check: How to Install a Router Linksys

Getting Access to a Router

Learn how to access your router’s settings as an administrator if you want to play with its settings. If you are connected to the same network as the router (i.e., you have an Ethernet cable connected to the router or you are connected to the router’s wireless network), you can try this simple method first:

  • Browse the web using your preferred browser.
  • Enter each IP address one by one in the URL bar: 192.168.0.1, 192.168.1.1, 192.168.2.1, 10.0.1.1, 10.0.0.1, 10.10.1.1.

Your next step will be to jump to the next chapter if you see a login window or a welcome page. Having trouble accessing your router with any of these IP addresses? Try the following method:

  • Go to the taskbar and click the Windows logo.
  • To change your settings, click the Settings icon.
  • Network & Internet is your choice.
  • To view your network properties, click View your network properties.
  • Find “Default gateway” by scrolling down.
  • Next to it is the IP address of your router.
  • Your favorite web browser should display the address in the URL bar.
  • Your router is accessible if you see a login screen or a welcome page.

Logging in as an administrator is the next step. There is a good chance that “admin” will work if you haven’t changed your router’s admin password. You can find this information on the information sticker on the bottom or back of your router. Sometimes the manufacturer prints the default username and password on this sticker.

Try long-pressing the reset button on the back of your router if you are still unable to access it. Even if you are still unable to access the router’s admin interface, try searching online for help. You can find router information on many websites, like this one, which lists router login information.

Also check: How often should you replace your router?

Changing the IP address of your router

The difference between a public and local IP address needs to be clarified before we explain how to change router IP address.

IP addresses assigned to computers and servers outside a network are known as public addresses. In addition, it’s also the address you see on websites such as What Is My IP?, which is a leading provider of IP address lookups.

Typically, your internet service provider assigns your public IP address, and you have no control over it. Even if your ISP provides you with a static IP address, there’s a good chance your IP address will change on its own or when prompted.

Local IP addresses refer to the addresses that your router and other devices behind it have, and you can change them as you see fit. The steps below describe how to do it on D-Link routers, and other manufacturers’ routers should be similar.

  • Go to your favorite web browser and enter the IP address of your router.
  • Username and password are the defaults.
  • Setup can be found by clicking on it.
  • You can choose your network settings here.
  • Under Router Settings, enter the new IP address of the router.
  • Save the settings by clicking Save.

You will no longer be able to access your router using the old IP address after you have changed it. Please remember this as changing your router’s settings again could throw you off.

How to Change Your SSID

Network names are really just fancy terms for SSIDs (Service Set Identifiers). A series of characters uniquely identifies every Wi-Fi network, as you’re probably aware. It’s likely that your wireless router has a very generic name if you’ve never changed your settings. The following steps will help you change it into something more memorable:

  • Go to your favorite web browser and enter the IP address of your router.
  • Username and password are the defaults.
  • Setup can be found by clicking on it.
  • The Wireless Settings page will appear.
  • Enter your new SSID here.
  • Wait for your router to restart after saving the new settings.

Don’t use a name that might be interpreted as offensive when you choose your Wi-Fi network name. Additionally, we recommend that you don’t try to make your network look like a public hotspot. Using a fake Wi-Fi name doesn’t really do anything to protect your privacy, but it can drastically slow down your download and upload speeds.

Setting up Guest Wireless and Multi-SSID

Multiple access points can be broadcast simultaneously by many modern wireless routers. A known device is typically connected to one access point, and a guest access point is typically created. One of the primary benefits is that you don’t have to share your main Wi-Fi password with strangers and trust that they won’t publish it.

Follow these instructions to set up a guest Wi-Fi connection with a Netgear router. should be very similar for routers from other manufacturers.

  • Go to your favorite web browser and enter the IP address of your router.
  • The username and password for the router must be entered.
  • Choose the Guest Network.
  • Select the Enable SSID Broadcast checkbox.
  • Give the name of the guest network.
  • Pick one of the security options.
  • Then click the Apply button to save your settings.

Here’s how you can Change the Password on Wireless Router?

 

Leave a Reply

Your email address will not be published.