September 27, 2022

How to access External Storage on Router

How to access External Storage on a Router FTP: Your USB drive can be shared on a LAN or accessed outside of the LAN.

For example:

LAN clients should only be able to access specific folders.

  • Share photos and other large files with your friends without logging into (and paying for) a photo-sharing site or using email.
  • Back up presentation materials in a safe place.
  • Using a USB cable, connect the USB storage device directly to the router’s USB port. Let the LED glow solidly for several seconds.
  • Tips:
  • You should not connect more than two devices to your router if you are using USB hubs.
  • In addition, if external power is required by the USB storage device, ensure that the external power is connected.
  • Make sure the file system on the USB hard drive is either FAT32 or NTFS.
  • You can safely remove a USB device from the router before disconnecting it physically: Go to USB Settings > USB Mass Storage and click Disconnect.

To set user accounts:

  1. To log in, visit and type in your router’s username and password.
  2. Select User Accounts in USB Settings.
  3. Select the Index for the account and enter a new username and password in the New Username and New Password fields, and confirm the password.

It is the Super User of an account with Index 1 with full access to all active volumes and shared folders.

  1. Click the Set button.
  2. After adding an account, you can check it, edit it or delete it.

Also check: How sites accessed through Wifi router

To set up your FTP server:

  1. Log in to your router with the username and password you set at
  2. Select FTP Server from the USB Settings menu.
  3. The FTP Server will be enabled when you click Enable.
  4. Select Enable to allow internet access to the FTP server.
  5. Enter the Service Port number. It is set to 21 by default.
  6. Click on the Apply button.

The following instructions are for specifying a folder that will be accessed through the FTP server:

  1. Select FTP Server from the USB Settings menu.
  2. Navigate to Add New Folder and click it.
  3. The Share Name field must contain the name of the folder to be shared. Click the desired folder to select it. Decide which users have access rights to the shared folder.
  4. Click the Apply button.
  5. The shared folder can be checked, edited, or deleted.

To access the USB disk locally:

For Windows:

How to access External Storage on a Router FTP? Enter the address in the address bar of Windows Explorer (or Computer), enter a username and password, and then click [Enter].

The following example is based on Windows 8.

For Mac:

Go to Connect to Server by clicking Go at the top left corner of the desktop.

Enter the server address

3) Click the Connect button.

4) Select the Registered User radio box and enter your username and password when prompted.

Remote access to a USB disk can be achieved as follows:

For Windows:

1) Open Windows Explorer (or Computer, if you use Windows) or a web browser.

2) Enter the server address in the address bar:

Enter the following address, such as ( The router can also be accessed by typing ftp://*domain name>:*port number> (for example, ftp://MyDomainName:21).

3) Press the [Enter] key.

4) Log in using the username and password.


Leave a Reply

Your email address will not be published.